Last month I started a sew along to create an advent calendar, did you make one too? I’d love to see your pictures. Here’s how mine turned out.
I started by ironing on lightweight interfacing onto the back of the panel (well DH ironed it on for me) We did this as there was so little fabric on the turn ins that I was worried it would fray.
DH had the idea of putting a thin strip of iron on interfacing on to the top and bottom edges again resisting any fraying and to stop things catching on the edges of the pockets. Thanks to my crocked hands DH put this on for me too. Turned into a joint project😉
Any pockets that spread over more than one square had box pleats. First I placed the pockets in place and sewed along the dotted line between the pockets. Next I pinned the two side edges in place and sewed the other edges in place. This has made for a nice secure pocket that should stand up to a few years use.
To hang the panel I made some tabs using the same fabric that was going on the back and I sewed those across the top inside the seam allowance and pointing down towards the bottom of the panel, so that when it’s turned through they will point up.
Not convinced that sewing into wadding would be a good plan without getting LOTS of fluff into the machine. I pinned the tabs in place so they didn’t get in the way, pinned the backing fabric on to the panel, right sides together and sewed around three and a half edges. I clipped the corners and turned everything right side out. Next I put the wadding into the ‘envelope’ of fabric and DH pinned it in place using curved safety pins. Then I sewed around the inner side of the decorative edge and finally it was finished.
I sewed around the fireplace area of the design and around the clock to highlight that. If I’d thought in advance I’d have sewed some blue ribbon under the pocket but I didn’t think of that till the pockets were already in place. DH pinned the bottom edge in and I top stitched around all the edges. This looks nice and holds things firmer.
Can’t say I loved the process, it took ages coz I over thought the whole thing made worse by never having quilted anything before and I was scared of getting wadding jammed in my machine. Change your needle as you go through the project it helps a lot. I am very pleased that I went with the interfacing, it has given a nice sturdy result and having now seen a few of these made up in a shop, I like the result the interfacing gave and would do it that way again.
Did you make an advent calendar for the sew along? I’d love to see your results.
Best wishes and thanks for reading, see you soon