Feeds:
Posts
Comments

Archive for the ‘Acrylic paint’ Category

Welcome Back

In today’s post I will be reviewing; Marble Art; Full kit.

Marbling 4 Fun; Marbling kit

Marbling 4 Fun; Marbling kit

Product Details

  • Manufacturer/Brand; Marbling 4 Fun/ Marble Art Kit
  • RRP at time of writing: £35

Reason For Buying

I’ve always wanted to try marbling on paper but in the past it looked so complicated and kits were expensive. I saw this kit demonstrated on Create and Craft, but on the makers own site they also had marbling combs, so I bought from them as the pattern I most wanted to create would need a comb.

Contents

  • Marbling paints: White, Yellow, Blue, Red and Black. 50gms of each
  • Alum crystals. 30grms
  • Floater Powder 40 gms
  • 8 Pipettes
  • Instruction sheet
  • A6 box for storage and to marble in.

Pros/Cons

Pros

  • Fun
  • Simple to do
  • Colours are mixable so you can mix any colours you like from the core kit
  • Neither the paints nor the floater mix smell, I am sensitive to highly fragranced products but neither gave me any issues.
  • Storage box the kit comes in becomes the tray you marble in
  • Bright colours from first prints
  • Later prints become lighter as there is less paint on the floater, you get beautiful faded pastel shades with later prints.

Cons

  • Needs a bit of prep for the area you want to marble in as papers take a good while to dry off
  • Best done in a room with a hard floor in case of spills
  • In a domestic situation, you would probably want to keep cats/dogs/ younger kids out of the room where you do this or where papers are drying, or they might walk on or or lick the gooey papers.

Build Quality

Excellent, does what it says on the tin. I like the fact that the tray that you marble in is also a storage box for the kit, which when you are short of space is helpful. The lids of the paints are easy to remove but also very secure.

Value for Money

Excellent. Its an affordable price for trying a new hobby.

Extras you will need

Its always advisable to keep craft and food items separate, so bear in mind you will also need the following items to get started, on top of the main kit.

  • Dedicated bowl (that will accept near boiling water), to mix the floater powder in.
  • Whisk also for mixing the floater powder.
  • Bottle of deionized water, the best prints are created with soft water, even bottled waters are hard so use deionized water for the best results (see Links)
  • A screw top bottle to store your mixed floater water. Once made up, it will last up to 3 months if stored in the fridge.
  • Air tight pots for your mixed paint, such as the little pots that used to contain 35mm film for cameras. (available from the company if you haven’t got any horded away)
  • Protect your working area with plastic, such as cut open bin liners ;)
  • Some extra pipettes if you want to mix loads of colours.

You will also use LOADS of kitchen paper to clean the tray between prints and a bucket to put the wet waste paper into is essential.

Optional Extras

  • Combs to create patterns in the paint, you can use paper clips etc but the company does sell a small comb.
  • Get the Violet paint! Its not in the main kit but it is beautiful, so if you budget will let you get it.
  • If you don’t want the paint to stain your fingers you can wear protective gloves
Marbling 4 Fun; Marbling kit plus Violet paint and a comb to help create patterns

Marbling 4 Fun; Marbling kit plus Violet paint and a comb to help create patterns

Would I buy it Again?

Yes, because I love the effects.

Summing up

If you have always wanted to marble but been put off by a lot of expensive kit, this is a great place to start. The finished results are superb from bright vivid colours for your first print out to pastels if you take later prints from the same paints on the tray.

Best to do this in a kitchen or on an area with a hard floor in case of spills and keep a plastic bucket next to you for the kitchen paper you use to clean off the tray with. I did this in the studio and cut open bin bags to cover the table for a wide area, had some disposable gloves so I didn’t colour my hands too. I put the marbling box on a tray and put layers of butchers paper for the prints to dry on.

After a marbling session

After a marbling session

Stick your mixed paint pots down! I thought I didn’t need to and when I stood the pipette in it, gravity tipped it over! I used a curl of masking tape and it held the camera pots to the side of the box nicely.

I stuck my pots to the tray with masking tape.

I stuck my pots to the tray with masking tape.

My papers took overnight to dry in an unheated outside studio. The papers will be covered in a layer of floater mix which feel a bit like light hair gel, so it does get messy but its lots of fun. The results were much better than I expected and by storing the floater mix in the fridge it can last up to 3 months after you first mix it. So you get a lot of prints from each batch of floater.

Messy but marvellous, does what it says on the tin! Its a lot of fun and the marbling effects are addictive and beautiful.

Links

If you would like to try this kit for yourself, check out the links below. Marble Arts do ship internationally too.

Marbling 4 Fun website

Full Marbling Kit

Deionized water

Best wishes and thanks for reading, see you soon

Billie :)

Read Full Post »

Welcome Back

They often say that art imitates life don’t they? Well unintentionally the exact thing happened when I painted this.

Art Journal Page; Hope

Art Journal Page; Hope

PIC

It started out as a play with texture paste, and my favorite colours of blues and paynes grey which is a lovely grey with blue tones in it. I added layers of paste, and colours and the finished piece was definitely an experimental journey rather than a planned trip! The last 4 years have been tough and this year I’ve been feeling pretty low thanks to having a lot of pain and little use of my hands to take my mind off things. This piece was  one of the early pieces I created, when I finally had enough use of my hands for my first afternoon in the studio this year.

I liked the look the texture pasted gave and just added some quinacridone Nickel azo gold to highlight it. With the ‘layer love’ style of layers of paint and drips, the finished piece reminded me of a phrase, ‘The light at the end of the tunnel.’ I’ve put a second picture in as its so hard to get the real colours of the piece to show in photographs.

Art Journal Page; Hope

Art Journal Page; Hope

Who knows how much use of my hands I’ll get back, will I ever be pain free? Its not looking likely any time soon but when the going gets tough I can look at this piece and remind myself that there are better days too, sometimes I get to play, if only for a short time.

Best wishes and thanks for reading, see you soon

Billie :)

Read Full Post »

Welcome Back

Today I’d like to share another mixed media project with you. This is one of those happy accident turned favorite pieces. Lots of texture and layers went into this piece.

Mixed Media art: 'Autumn Days'

Mixed Media art: ‘Autumn Days’

After a layer of gesso had dried I used thick acrylic paint to add more texture. Layered over that are two shades of brown applied with the brayer. Love the texturing the brayer creates, it’s a speedball brayer of the soft rubber, smell like school plimsolls but works oh so well.

The white is gesso or texture paste, both were around and not sure  which I used now as you can probably guess that was added using bubble wrap. Great texture from the plastic in the bubbles :)

This is another one that I like too much to add more too right now. It has joined others in the pile which may later be used as a base for further development with text or images but I’m enjoying it as it is right now.

Have you tried brayer meets acrylic paint yet? I highly recommend it, lots of messy fun play.

Best wishes and thanks for reading, see you soon

Billie :)

Read Full Post »

Welcome Back

Do you ever start a creative experiment, just trowing things on the page to see what happens? Then find a result you like so much you just have to stop as you like it too much to add more? Here is the piece where that happened to me. This piece reminds me of a documentary I saw where they showed a diver swimming though kelp, lots of long strands of kelp with the sunlight twinkling though the half-light beneath the water.

Mixed Media art: 'Under the sea'

Mixed Media art: ‘Under the sea’

I had applied gesso to  the base board, then applied heavy body acrylic thickly with a sponge, then I heated it. (Best done in a well ventilated room as O. M days did it whiff!) The result looked a bit like crackled wood. Loving it too much to continue I left it aside for a few weeks. I do this as I frequently seem to make things I love too much to cover. I do this too with stuff I think doesn’t work as with a few weeks wait, you come back to a project with new eyes.

So I came back to the crackly paint, and applied a layer of green paint with the brayer (my new but now covered with acrylic paint so it gives good textures brayer).  This gave an even better look, once dry I have added more layers of washes and sponged on more texture.

This piece is likely to evolve further in the future so it will get perhaps text or imagery, but for right now, I love it just as it is.

How about you, what do you do if you get a piece you don’t like? Do you hide it in a box for a while and come back to it later? Maybe you gesso over it and hide all the evidence it ever existed? Do you feel the need to add lettering, images to every piece or are you happy to have a beautiful piece that you may once have thought of as a background, a place to start but now love just for its own right? Would love to hear your thoughts?

Best wishes and thanks for reading, see you soon

Billie :)

Read Full Post »

Welcome Back

Today I’d like to share an experimental piece of mixed media art. If any of you are following me on Twitter or are members of the UK Stampers forum, you will know I’ve been very tempted by a Geli Plate but not having the funds to buy one I’ve been trying alternative ways to create a similar effect.

Mixed Media art: 'Beneath'

Mixed Media art: ‘Beneath’

To try to replicate the geli plate I put some thick funky foam under my craft mat, spread on acrylic paint to the mat using a brayer, then pounced on it with bubble wrap. I pressed the piece of card that had a layer of acrylic paint on it, the result was very faint but now my brayer had a layer of dried acrylic paint on it was giving a lovely textured finish.

I applied more paint to the craft sheet, removing the mat, it hadn’t achieved what I’d hoped. Love the ripple look the brayer now gives and using paint still on the sheet I pounced onto that with the bubble wrap to pick up paint. Love the texture that gave too.

Call me converted. I love acrylic paint + brayers :) :) :) MUCH fun. A word of warning for the folks that like to keep stuff clean, this will leave paint on the brayer that dries. If you like using your brayer with ink, get a separate one for paint, as it won’t be the same again.  So far I haven’t tried removing the paint on the brayer, I’m enjoying the textures its creating. If it gets too clunked up and I feel the need to clean it, I’ll let you know how I do so. (OM Days did I really just say that! Yes I am a card carrying ‘won’t use Stayz on coz I can’t get it off the stamps and I’m happy not cleaning my brayer!!!!!)

If you haven’t tried it yet, rush over to Joanna Sheen who has brayers for great prices, grab a craft sheet ( I use the  Magic Non Stick liners from Lakeland) and give this a go, its so much fun. Like the geli you can’t ‘control’ it too much but that’s all part of the excitement.

Have fun playing, hope you give this a try.

Best wishes and thanks for reading, see you soon

Billie :)

PS: As you probably guessed, I am saving for a geli plate ;)

Read Full Post »

Follow

Get every new post delivered to your Inbox.

Join 220 other followers